Loading
Rahmat S. Masror

MSCS, BBA, DIT, MCSE, CCNA, COM TIA+

IT Expert

Freelancer

IT Consultant

Server/Database Expert

3CX Advanced Certified Engineer

Rahmat S. Masror

MSCS, BBA, DIT, MCSE, CCNA, COM TIA+

IT Expert

Freelancer

IT Consultant

Server/Database Expert

3CX Advanced Certified Engineer

Blog Post

DATA LINK Layer – OSI Model

August 7, 2016 ISO/OSI Ref

Data link layer is most reliable node to node delivery of data. It forms frames from the packets that are received from network layer and gives it to physical layer. It also synchronizes the information which is to be transmitted over the data. Error controlling is easily done. The encoded data are then passed to physical.

Error detection bits are used by the data link layer. It also corrects the errors. Outgoing messages are assembled into frames. Then the system waits for the acknowledgements to be received after the transmission. It is reliable to send message.

 

FUNCTIONS OF DATA LINK LAYER:

  1. Framing: Frames are the streams of bits received from the network layer into manageable data units. This division of stream of bits is done by Data Link Layer.
  2. Physical Addressing: The Data Link layer adds a header to the frame in order to define physical address of the sender or receiver of the frame, if the frames are to be distributed to different systems on the network.
  3. Flow Control: A flow control mechanism to avoid a fast transmitter from running a slow receiver by buffering the extra bit is provided by flow control. This prevents traffic jam at the receiver side.
  4. Error Control: Error control is achieved by adding a trailer at the end of the frame. Duplication of frames are also prevented by using this mechanism. Data Link Layers adds mechanism to prevent duplication of frames.
  5. Access Control: Protocols of this layer determine which of the devices has control over the link at any given time, when two or more devices are connected to the same link.

 

Data Link Layer in ISO-OSI Model

Tags:
Write a comment